This high quality reinforced silicone hose kit replaces 9 coolant hoses in the engine bay listed below. The hoses fit all manual MK4 Astra GSi and SRi models with the Z20LET engine that are right hand drive (RHD). Please note that all screens display colours differently and while we make every effort to ensure our photos are as accurate as possible on the majority of monitors and devices the product colour may vary slightly from the colour you see on screen. The kit is available with a full set of hose clamps using the options above.
The three types of clamp we offer are shown below, but not all options will appear for some kits due to clamp size limitations. Spring clamps are the most commonly used type by vehicle manufacturers.
They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit/remove, and being mild steel they are prone to minor surface rust if their coating is chipped/scratched. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should. Worm-Drive clamps have slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.
T-Bolt clamps are the most heavy duty clamps we supply, and are also 100% stainless steel to prevent rust. However they are much more expensive and, like the Worm-Drive clamps provide a slightly less evenly distributed clamping force than the Spring clamps. For this reason we recommend using them for Turbo applications (intercooler/intake hoses) where high boost can cause hose blow-off's and the additional clamping force is useful. Some customers like to use T-Bolt clamps for all hoses on their vehicle however so we offer them as an option for most of our kits. For some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.We are a British-based business located in Shropshire, all our stock is dispatched from our UK premises. Looking for a silicone hose kit for your vehicle? How about a FREE one! If we don't already produce a kit for your car and you can supply us with the standard hoses we may be able to have a silicone hose kit made up for you FREE of charge! This is subject to your car being one we are interested in making a kit for, we may not be able to make a kit for your vehicle if it is rare or not popular for modifying or use in motorsport. The turnaround for this is around 5-7 weeks from when we receive your stock hoses, so unless you can source a spare set to send us your car would need to be off the road for this period. Fitment: Direct replacement for the standard hoses. Construction: 4.5mm 4-ply silicone with 3-ply polyester reinforcing.
Operating Temperature range: -50°c to 240°c. Certification: Manufactured to ISO9001:2000 & ISO TS16949 standards.
Occasionally a hose may need to be trimmed slightly which can be done with a utility/stanley knife with a NEW blade using a hose clamp as a guide to get a straight cut. The postcode should be in capital letters and a telephone number should be provided for courier deliveries. Unfortunately we are not able to deliver to Post Office box addresses. We keep our stock levels as correct as possible but our products are available for sale elsewhere and occasionally when we only have one or two of an item left we may run out of stock before we have chance to end the listing.
Whilst we do re-stock the majority of our items it can be several weeks before an item is back in stock. We do not dispatch orders on weekends or UK bank holidays. Unfortunately our workshop is on a site that is strictly no retail customers so we are not able to offer collection on our items. Please note that we cannot deliver to Post Office Box or Army Post Office addresses for any international orders.
If the item is dirty, marked, damaged or otherwise affected from attempting to fit we are unable to offer a return unless the item was incorrectly sent or faulty. Once any sealed retail packaging is opened we may not be able to accept a return, so we recommend reading the listing carefully and checking the item through the packaging where possible before opening. Lost, Damaged & Faulty Items. If your item arrives damaged or faulty please let us know as soon as possible. If you need to sign for your item and the outer packaging is damaged when the courier hands it to you please write "DAMAGED" next to your signature.Our new workshop is in a rural location with no landline connection and very poor mobile reception so we can no longer offer telephone support. Purchasing an item from us is considered as acceptance of these terms and conditions.
The item "Silicone Coolant Radiator Hoses fits Vauxhall Astra MK4 GSI Z20LET Stoney Racing" is in sale since Thursday, January 17, 2019. This item is in the category "Home, Furniture & DIY\Plumbing & Fixtures\Other Home Plumbing & Fixtures". The seller is "stoney-racing" and is located in Shrewsbury. This item can be shipped worldwide.