Front bumper + Rear bumper + Side skirts MADE OF FIBERGLASS GRP GLASS REINFORCED PLASTIC NOT PAINTED PICTURES WITH FITTED SPOILERS ON THE VEHICLES ARE ONLY FOR DEMONSTRATION OF FINAL EFFECT PURPOSES WE DONT OFFER PAINTED ITEMS -PLEASE DONT ASK HOW MUCH WE TAKE FOR SPRAY JOB AS WE DONT DO IT Picture shown is for illustration purpose only. Actual product may vary due to product enhancement.
Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Our entire product line is a direct fit but some may need modifications.
We strongly recommend that upon receiving this item, you carry out a mock fit test in order to determine if this product is matching your vehicle. Preparation work will be required to guarantee a spotless smooth finish once painted. Roof spoilers mostly dont require any drilling fitting with trusted bonding agent, like SIKAFLEX or TIGERSEAL will do the job.
Why does description make you feel that our spoiler is not very good? DEAR CUSTOMERS our items are not magical - they are just good quality products which need a good experienced bodyshop with touch of MAGIC ENJOY THE PRODUCT AS WE ENJOY DOING OUR JOB: Painting tips for Trained Body Shop : Before you attempt working on the part please do a test fit and find out if this part is the right one.
Step 1 heat up the spoiler by heater gun or in spray oven to expose possible defects like air bubbles etc Step 2 ; Prepare the surface, remember to leave technical holes on the spoiler if they exist Step3 ; Apply first coat of spray filler to fill any pin holes or gaps that you may discover during preparation. This coat must be applied even if you believe there is no pin holes or gaps. Allow to dry and apply a coat of primer.
Step4 ; Proceed to spray and remember painting temp should not exceed 40 degree Celsius. Installation tip: Step 1: Mock fit, place the product and check the fit, carefully check both ends, find the optimum emplacement.
If unsure please seek the advice or help from a professional Step2: Clean the surfaces concerned prior to bonding, using an alcohol base agent (no oily substances) Step3: Apply a trusted bonding agent, like SIKAFLEX or TIGERSEAL, on the concerned areas and place the eyebrows on the desired spot. Press firmly and allow it to bond. You can use an adhesive tape to help keep the product in place while the glue dries off.That is the end of the installation; now enjoy your newly improved look. Do not wash or power jet wash your vehicle for 48 hours as the bonding is still under process. After installation please allow 12 hours of resting time , do not drive your vehicle under no circumstances. Don't exceed 60 MPH on the first day , after 24 hours normal course resumes. The item "Vauxhall Astra G MK4 Coupe Body kit GTR-X" is in sale since Tuesday, October 04, 2016. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Body & Exterior Styling\Spoilers & Wings". The seller is "exmatrade" and is located in bedford.
This item can be shipped to United Kingdom.